Overview - Nortel HomeOffice II User Manual

Maintenance

Overview

Introduction
Use the SET commands to configure the HLC according to the needs of the
company and its telecommuters.
Note: You must configure each HLC individually, even if it resides in a daisy
chain.
SET CONFIG (S C)
Use the SET CONFIG or S C command to assign card-wide configuration
settings.
SET DATE (S D)
Use the SET DATE or S D command to set the date maintained by the HLC.
SET ECHO (S E)
Use the SET ECHO, or S E command to enable or disable echo canceling for
any or all of the HLC's 16 channels.
SET IDENTIFIER (S I)
Use the SET IDENTIFIER, or S I command to assign a unique Security
Identifier for each individual HomeOffice site or user (agent).
SET ONOFFTABLE (S O)
Use the SET ONOFFTABLE or S O command to assign the schedule of times
during the week that a telecommuter can have access to a company ISDN
connection.
SET PHONE (S P)
Use the SET PHONE, or S P command to determine the characteristics of the
telephone or telephones (in multiple-user configurations) used on a specific
channel.
112
Standard 01.02
Meridian HomeOffice II