Mitsubishi Heavy Industries SRK100VNXWZRF Service Manual page 219

(5) Connect the air conditioner to the network.
(WPS/AP).
See item (A) for WPS, and item (B) for AP.
(A) Connect the air conditioner to the network with WPS function
1) Press the WPS button.
Press the WPS button on the router*. The buttons
generally look like this.
Operation to connect to the router using WPS may
vary, refer to manufacturers installation guide for
instructions.
* If using an automatic connection function other
than WPS, refer to manufacturers installation guide.
2) Use the "Air Conditioner List" screen to register an air conditioner to
operate.
Tap the [Find unregistered Air Conditioners] button to display unregister air
conditioners on the application.
The air conditioner name displays the last 6 digits of the SSID in the
position indicated by in the image below. (Refer to section 6 for instructions
been performed properly.
• If it is not connected, wait at 2 minutes until the RUN and TIMER light on
the indoor unit are no longer lit and repeat process from section 4.
• If the air conditioner still cannot be connected to the application, the
number of devices connected with the wireless LAN router may have
reached its upper limit, or the router may not be operating or may have
failed. Therefore, check the wireless LAN router according to the user's
manual of the router.
• If the air conditioner cannot be connected to the application even by
following the setting procedure in this manual, refer to FAQ in the menu of
the application.
218
- -
'22 • PAC-SM-422
WPS button