Mitsubishi Heavy Industries SRK100VNXWZRF Service Manual page 218

(4)
the connection method with the wireless remote
control (WPS/AP)
1)
2) The Wireless LAN connection setting cannot be set whilst the unit is
wireless remote control.
3) Select the Wireless LAN connection setting "SL" by pressing the MENU
switch on the wireless remote control.
4)
mode) or "E2" (AP mode) using the ▲ and ▼ (TIMER) buttons on the
wireless remote control.
<Note>
After performing step 5) below, it is
necessary to complete up to step 5 (A)
3) within 2 minutes for WPS mode, and
up to 5 (B) 3) within 5 minutes for AP
mode.
Prepare the necessary information
(SSID, KEY, MAC address, and your
home Wi-Fi network password) in
advance.
5) Press the SET button on the wireless
remote control.
The indoor unit will emit "peep pip" to
RUN and TIMER lights will also blink
simultaneously at 1 second ON, 1 second
OFF.
If no sound is emitted by the unit, return
to step (3) and repeat the process.
<Note>
If [Find unregistered Air Conditioners] button
has been performed correctly.
WPS mode
Wireless remote control
217
- -
'22 • PAC-SM-422
AP mode
(2)
(5)
(4)
(3)
7