Uploading A Certificate To The Application Gateway - Nortel 1000 Administration Manual

2
3
4
5
6
7
8
9
10
11
12

Uploading a Certificate to the Application Gateway

Note
1
2
Double-click the Lock symbol in the bottom right corner of the browser.
Switch to the Certificate Path window pane at the top of the screen.
Double-click the first path level to bring up the Certificate information for
the first level and then go to the Details screen.
Click the Copy to File button at the bottom.
After the Certificate Export Wizard appears, click Next.
Click the format Base-64 encoded and then click Next.
Enter a filename. For example, G:\tmp\root.cer.
Review the information and note the complete filename. Click Finish.
Click OK to close the Certificate information window for the first level.
Repeat Steps 5–11 for all levels except the last level.
Insert all certificates into one file, and make sure that any intermediate
certificates are part of any certificate file you upload.
The file to be uploaded should be in the following format:
private key
Server Certificate
Intermediate Certificate 0
Intermediate Certificate 1
Intermediate Certificate 2
After you have completed the steps to obtain and assemble a properly
formatted, signed certificate and private key, you can upload it to the
Application Gateway.
When you save the Application Gateway configuration, the uploaded
certificates are included in the backup.
To upload a certificate file:
In the Administration Tool, go to the Administration > Maintenance
page.
Across from Upload Certificate, click Browse.
Chapter 2
Generating a Secure Certificate
Application Gateway Administration Guide
Basic Administration
21