Creating An Application Gateway Cluster - Nortel 1000 Administration Manual

Chapter 3 Network Connection Configuration

Creating an Application Gateway Cluster

1
2
3
4
5
6

Creating an Application Gateway Cluster

34 Application Gateway Administration Guide
The interface 1 port (IP address 192.168.0.20) is set to communicate
•
with the 192.168.0.0 network and its gateway (IP address 192.168.0.1).
Through this gateway, the interface 1 port can communicate with the
129.6.0.0 network, and the server at IP address 129.6.0.20.
To set up this static route, you need to establish the path between the
interface 1 port and IP address 129.6.0.20.
To set up the example static route:
Go to the Network > Routes page.
Set the IP address of the destination LAN to 129.6.0.0.
Set the subnet mask for the gateway device.
Set the IP address of the default gateway to 192.168.0.1.
Choose eth1 as the gateway device interface.
Click Add Route Info.
To use voice applications across IP phones that are associated with
multiple Application Gateways, you must group the Application
Gateways into a cluster. An Application Gateway cluster enables IP
phones to send alerts and pages to distribution lists and zones that include
phones from all Application Gateways in the cluster. Smart Agent also
works across clusters.