Broadcast Server Software Installation; Connecting The Application Gateway And Broadcast Server - Nortel 1000 Administration Manual

Chapter 6 Broadcast Server Installation
Installing Broadcast Server Software

Broadcast Server Software Installation

1
2
3
4
5

Connecting the Application Gateway and Broadcast Server

1
2
76 Application Gateway Administration Guide
The Broadcast Server installer is provided on a CD-ROM. Onscreen
prompts guide you through the required steps. Note that the credentials
requested are for Broadcast Server only.
To install the software:
On the device to be used as Broadcast Server, insert the Broadcast Server
CD-ROM in the CD drive.
If the installer does not start automatically, run setup.exe.
Follow the steps in the Setup Wizard.
Upon completion, the Setup program will open a browser window
displaying the Broadcast Server Configuration Wizard.
Follow the steps in the Configuration Wizard.
Use a static IP address for Broadcast Server.
Upon completion, the Configuration Wizard will open the Broadcast
Server administration window.
Log in and complete the items listed in the "Outstanding tasks" area on
the Broadcast Server home page. These steps include changing the
administrative password, defining groups and creating users.
To enable the Application Gateway to locate Broadcast Server, you need
to specify the route to Broadcast Server in the Application Gateway
Administration Tool. The Application Gateway communicates with
Broadcast Server server over port 9998.
To specify the Application Gateway route to Broadcast Server:
Make sure that the Application Gateway is running.
From a web browser, connect to the Application Gateway by entering the
URL:
https://ipAddress:adminPort
where:
- ipAddress is the IP address of your Application Gateway