Adding Dialing Rules - Nortel 1000 Administration Manual

Chapter 5 LDAP/CSV Directory Configuration

Adding Dialing Rules

Adding Dialing Rules
1
2
66 Application Gateway Administration Guide
By default, the full telephone number that is stored in a directory is dialed
when the IP telephone user selects a number in Express Directory or
Visual Voicemail. You can customize telephone numbers as follows:
You can specify the number of digits to be dialed. For example, you
•
can specify that only the last four digits of numbers beginning with
"423500" should be dialed. In that case, if the number in the directory
is 423-500-0987, the Voice Office application will dial 0987.
You can specify the prefixes to be dialed with all numbers that are 3 to
•
5 digits, 6 to 7 digits, and 8 or more digits (as stored in the source
directory).
Dialing rules apply to all configured directories. You can alternatively
specify a prefix for each directory source, as described in
LDAP Attributes for Voice Office Operations," page
The prefix specified in a dialing rule will precede the prefix specified
for a directory. For example, suppose that you have two directories, A
and B. A call to directory A requires the prefix "5" and a call to
directory B requires the prefix "6". All calls require a "9" to be dialed
first, so the dialing rule specified on the IP Phone page is "9". Thus,
the number dialed for a call to directory A would be "95number" and
the number dialed for a call to directory B would be "96number".
Dialing rules are used by the Application Gateway when it looks up LDAP
information for Zone Paging and Broadcast Server. The Application
Gateway reconstructs the full number from the extension and the dialing
rules and then looks up the department for Zone Paging and the
department and user name for Broadcast Server.
To add dialing rules:
Go to the Operation > Voice Office > IP Phone page.
If your telephone system does not need to dial the full telephone number
that is stored in a directory (perhaps for internal extensions), specify how
the number should be trimmed.
"Specifying
57.