Applying the SRG application update
To apply the SRG application update
1
Have the SRG50 Release 1.0 Documentation CD and the SRG50 Application Update CD on
hand.
2
Insert the SRG50 Release 1.0 Documentation CD into the CD/DVD drive of your client PC.
3
Copy the BCM50 First Time Installation and Configuration Guide (N0027149) to the hard
drive of the PC.
4
If not done already, download and install the BCM50 Element Manager on your client PC
(refer to the Task List in the BCM50 First Time Installation and Configuration Guide).
5
Load the SRG50 Application Update CD into your PC.
6
Launch the BCM50 Element Manager.
7
Connect to the BCM50 system (refer to the Task List in the BCM50 First Time Installation
and Configuration Guide).
8
Navigate to the Date and Time panel (Configuration > System > Date and Time).
9
On the Current Date and Time subpanel, change the Date and time as required and select
the appropriate time zone from the Time zone pull-down menu.
10 Navigate to the Software Updates panel (Administration > Software Management >
Software Updates).
11 Click Get New Updates button.
12 From the Retrieve from pull-down menu, select My Computer.
13 Browse to the SRG50 Application Update CD and click Select.
An update summary appears.
14 Select the file whose filename begins with SRGP and click Apply.
The update proceeds. The BCM50 reboots automatically at the end of the application.
Note: There is a delay between successful update of the application and
the automatic reboot of the system. Wait for the system to reboot before
proceeding.
Applying SRG50 keycodes
Four keycodes are available for SRG50. The initial keycode enables the SRG50 application, and
includes:
•
eight survivable IP users
•
up to 24 H.323 VoIP trunks
•
MCDN/QSIG enabled
Chapter 1 Getting started
Survivable Remote Gateway 50 Configuration Guide
11