Specifying The Language Of The Voice Office User Interface; Enabling Communication Between The Phones And Application Gateway - Nortel 1000 Configuration Manual

Specifying the Language of the Voice Office User
Interface
Enabling Communication between the Phones and
Application Gateway
1
2
The Application Gateway restarts and will be inaccessible to the phones
until the phone attempts to reconnect to the Application Gateway.
Connection attempts occur automatically according to the Watchdog
timer interval. A phone user can also force a reconnection by restarting the
phone.
By default, Voice Office screens display in English on IP phones. To
change the user interface language used for Voice Office, go to the
Operation > General page and choose a language from the IP Phone UI
Language menu.
To support Nortel IP Phone 2007, you must specify the port over which the
Application Gateway and phones will communicate.
You must point all phones to the Application Gateway by configuring
DHCP or by configuring each phone. This one-time setup applies to all
Application Gateway Voice Office applications.
Configure an AG port for communication with IP Phone 2007:
Open the Application Gateway Administration Tool: From a web browser,
enter the URL https://AG_ipAddress:AG_adminPort.
Go to the Operation > General page.
Chapter 1 Voice Office Configuration Requirements

Specifying the Language of the Voice Office User Interface

Voice Office Application Suite Configuration Guide
7