Configuring Ssl On The Tm 3.0 Server Platform; Enabling Ssl For Tm 3.0 Web Login - Nortel 1000 Installation And Configuration Manual

90

Configuring SSL on the TM 3.0 server platform

Procedure 9
Configuring SSL on the TM 3.0 server platform
To install the certificate from the Internet Services Manager application on a Windows
server, complete the following procedure:
1
2
3
4
5

Enabling SSL for TM 3.0 Web login

Procedure 10
Enabling SSL for TM 3.0 Web login
To enable SSL for TM 3.0 Web login, complete the following procedure.
1
2
553-3001-230 Standard 10.01
Launch the application from Programs > Administrative Tools > Internet
Services Manager.
From the left navigator pane, select the Default Website.
Right-click on Default Website and select Properties.
From the Properties window, select Directory Security tab and click Server
Certificate under Secure Communications. The Web server Certificate Wizard then
walks you through the installation of the certificate.
After the certificate installation is completed, go to the Default Website Properties
window and select the Web site tab. Ensure the SSL Port is set to 443.
From TM 3.0 Navigator (Windows or Web), launch the User Authentication
application.
Select the checkbox Use SSL for Web login authentication.
September 2007
Configuring Secure Sockets Layer (SSL)
End of Procedure
End of Procedure