Tm 3.0 Software Requirements - Nortel 1000 Installation And Configuration Manual

Preparing for installation
Table 3
TM 3.0 hardware requirements (Part 3 of 3)
Requirement
Parallel printer
port (configured)
or USB port
(required for
dongle)
Two-button
Windows-
compatible mouse
or positioning
For external modems or direct connection, the PC must have an available serial port (that
is, one not used by a mouse or other serial device). The number of on-board PC COM
ports required depends on the number of external modems or direct connections
required.

TM 3.0 software requirements

Novell
The TM 3.0 server is not supported on a Novell server. TCP/IP communication is
supported. IPX/SPX communication is not supported.
General restrictions
The following general restrictions apply for TM 3.0:
•
•
Server
Configuration
Required
Required
The user is responsible to ensure that selection of 'Signaling server present'
checkbox is completed. TM 3.0 cannot automatically determine if a system has a
Signaling server.
For CS 1000M CA and CS 1000M CH systems, both appear in TM 3.0 as a
CS 1000M Small System. Existing fields are used to differentiate the hardware.
The user can:
— name the system to reflect hardware when adding the system
— add information into comments field to describe hardware
CS 1000 Telephony Manager Installation and Configuration
Single
(stand-alone) Client
Configuration Configuration
Required Required
Required Required
35