68
•
Password: Specifies the password needed to access the shared resource. Type
an asterisk (*) to produce a prompt for the password. The password is not
displayed when typed in at the password prompt.
•
/user: Specifies a different user name with which the connection is made.
•
DomainName: Specifies another domain. If you omit DomainName, net use
uses the current logged on domain.
•
UserName: Specifies the user name with which to log on.
Figure 20
Mapped Drive from Command Line window
Installing the client software
Procedure 4
Installing the client software
1
553-3001-230
Standard 10.01
Note: The initially mapped drive is the drive that must always be mapped for TM to
function.
Before installation:
a.
On client PC, exit all Windows programs.
b.
Ensure Distributed COM is enabled. For DCOM to work, the TM 3.0 client must
be able to reach the TM 3.0 server by its actual IP address. If Network Address
Translation (NAT) is used on the server, the TM 3.0 client is not able to reach
the server:
i.
From Control Panel>Administrative Tools>Component Services, right-click
My Computer under the Computers folder of the Console tree.
ii.
Click on the Default Properties tab, ensure the "Enable Distributed COM on
this computer" check box is selected.
September 2007
Installing TM 3.0 client software