Product Guide
Weights and Dimensions
Installation, Start-up, and Initialization
Installation
Installation of the UV800 should be performed by a trained Stratasys representative.
Moving the UV800
The UV800 is fitted with 4 castor wheels for easy relocation. The front pair of castors are fitted
with brakes. Release the brakes before attempting to move the UV800.
Safe Start-up and Shutdown Sequences
To assure safety during start-up, perform the following steps:
In some regions an AC/AC transformer will be required to meet the specified input
voltage. Using the specification above, Stratasys recommends the transformer is
sourced locally, ensuring it meets local regulations.
Stratasys recommends that all electrical supply work is undertaken by a qualified
electrician.
Figure 5: Weights and dimensions
Before moving the device, consider the power supply cord at rear.
Brakes must be engaged before operating the UV800.
Installation, Start-up, and Initialization
Page 8