Table of Contents
Advertisement
Product Guide
Electrical Safety
Please refer to the Technical Specification section for electric supply specification.
•
Connect equipment to a grounded facility power source. Do not defeat or bypass the
ground lead.
•
Know the location of equipment branch circuit interrupters or circuit breakers and how to
turn them on and off in case of emergency.
Always observe the following guidelines:
Please note space requirement for access to isolation switch at the rear of the
device. Refer
Figure 2 (page
Do not overload a wall outlet, extension cord or adapter as this may result in an
electric fire or shock.
Never use a power cord with an inadequate rating to supply the device.
Inspect the power cord for damage before use.
Do not bend or twist the power cord.
Do not touch the power plug with wet hands.
Do not remove covers as hazardous voltages are present inside.
3).
Page 4
Advertisement
Table of Contents
