Advertisement
To replace the bridge part of the transfer
surface, first remove the water bath to have
enough clearance for the replacement work.
Now dismount the bridge part from the lower
part of the bridge via a screwdriver and mount
a new bridge part from the front.
Afterwards, place the water bath onto the
heating plate.
Note:
In case, other cleaning methods should
be used, first contact the manufacturer.
6-2
DISPOSAL OF THE INSTRUMENT
AFTER FINAL SHUTDOWN
After the final shutdown of the instrument, we
recommend to contact a local recycling
company for the disposal according to the
national applicable regulations.
To be applied in the countries
of the European Union and
other European countries with
a separate collecting system
within the waste management.
The marking of the product and/or the
respective literature indicates that, after its final
shutdown, it must not be disposed of together
with ordinary domestic waste.
Please
dispose
separately from other waste to not harm
our environment and/or human health by
uncontrolled waste disposal.
Recycle your instrument to support the
sustainable recycling of material resources.
Industrial users should contact their
suppliers and observe the conditions of the
contract.
This
product
disposed of together with other commercial
waste.
Please contact your supplier!!
Thermo Scientific Section Transfer System Microm STS
of
your
instrument
must
not
be
Microm International GmbH
Part of Thermo Fisher Scientific
Im Steingrund 4 - 6
63303 Dreieich / Germany
387 712 - English
29
Advertisement
