Console Port Settings; Switch Banner; User Name And Password; Nortel Ethernet Routing Switch 2500 Series - Nortel 2500 Series System Configuration Manual

66 System configuration software features
•

Console port settings

The efault settings for the Console port are:
•
•
•
•

Switch banner

When you connect to the switch through the Console port or through a
Telnet connection, you are presented with a Nortel switch banner. Enter
Ctrl+Y to proceed to the CLI interface.
Figure 20
Login banner

User name and password

You can use the CLI to set user names as well as passwords for system
access through the CLI, Telnet, and web-based management. The syntax
for the username command is:
username <username> <password> [ro|rw]
Copyright © 2007, Nortel Networks
.
GUI lets you configure, monitor, and maintain your network through Web
browsers. You can also download software using the Web.
For information about web-based management, see
Web-based management interface" (page
Any generic SNMP-based network management software.
You can use any generic SNMP-based network management software
to configure and manage an Ethernet Routing Switch 2500 Series.
9600 baud with eight data bits
One stop bit
No parity as the communications format
Flow control set to disabled

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007
"Using the
145).