Configuring An Ip Address For A Vlan - Nortel 8300 User Manual

62 Configuring VLANs
6
7
8
9
10
11
12
Configuring an IP address for a VLAN
To configure an IP address for a VLAN:
Step
1
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Type or select a spanning tree group ID for the VLAN in the StgId
field.
Select the byPort option button in the Type field.
Click the ellipsis (...) in the PortMembers field.
The VlanPortMembers dialog box appears. See
dialog box" (page 62).
VlanPortMembers dialog box
Click the ports to add to the VLAN. Ports that display in gray cannot
be added to the VLAN. (For example, you cannot select ports that
are not in the same STG as the new VLAN.)
Click Ok.
The VlanPortMembers dialog box closes and the port members
appear in the VLAN, Insert Basic dialog box.
Click Insert.
The VLAN, Insert Basic dialog box closes and the VLAN appears in
the Basic tab.
Do one of the following:
• If you are not assigning an IP address to the VLAN, click Close.
The VLAN is configured and the VLAN dialog box closes.
• If you are assigning an IP address to the VLAN, see
an IP address for a VLAN" (page
Action
Select VLAN > VLANs from the Device Manager menu bar.
The VLAN dialog box appears, with the Basic tab selected. See
Figure 20 "VLAN dialog box - Basic tab" (page
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
62).
—End—
"VlanPortMembers
"Configuring
58).