Nortel 8300 User Manual page 70

70 Configuring VLANs
Table 9
VLAN - Advanced tab fields
Field
Id
Name
IfIndex
Type
MacAddress
Vlan Operation Action
Result
UserDefinedPidList
Encap
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Description
The VLAN ID.
The name of the VLAN.
The logical interface index assigned to the VLAN.
Type of VLAN:
• byPort
• byIpSubnet
•
byProtocolId
The MAC address assigned to the virtual router interface for this
VLAN. This field applies only when the VLAN is configured for
routing. This MAC address is used as the Source MAC in routed
frames and ARP replies.
One of the following VLAN-related actions:
• none — None of the following updates are made.
•
flushMacFdb — flush MAC forwarding table for VLAN
• flushArp — flush ARP table for VLAN
• flushIp — flush IP route table for VLAN. When this command
is executed, a RIP request is immediately sent out to solicit
the updated RIP routes.
• all — flush all tables for VLAN. When this command is
executed, a RIP request is immediately sent out to solicit
the updated RIP routes.
•
flushSnoopMem — flush IGMP Snoop Members
• flushSnoopMRtr — flush snoop multicast router
Result code for action.
User-defined protocol ID list if the user selected and defined a
protocol type.
This encapsulation is for user-defined protocol-based VLANs.
The default value is null.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007