Nortel 8300 User Manual page 67

8
9
10
11
12
13
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
VLAN, Insert Basic: insert a user-defined, protocol-based VLAN
Enter the PID for the protocol in a four-digit hexadecimal range or
list format in the UserDefinedPidList field.
You can specify up to a maximum of eight PIDs for a user-defined
VLAN. You can specify the PIDs as a range separated by dashes
(-), or individual PIDs separated by commas (,) or a combination of
the two. For example, you can specify 9001-9004 or 9001, 9002,
9003, 9004 or 9001, 9003-9009.
For information about PIDs that cannot be used, see
protocol-based VLANs" (page
Select an encapsulation option button in the Encap field.
Select a level option button (0-7) in the QosLevel field.
Click Insert.
The VLAN, Insert Basic dialog box closes, and the protocol-based
VLAN is added to the Basic tab of the VLAN dialog box.
Click Apply.
Click Close.
The non-standard protocol-based VLAN is configured.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Creating a VLAN 67
21).
"User-defined