Ist Mlt Dialog Box; Removing An Ist Mlt - Nortel 8300 User Manual

7
8
9
10
11
12
13
IST MLT fields

Removing an IST MLT

To remove an existing IST MLT from the switch:
Step
1
2
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Click Apply.
Select any field in the row.
The IstMlt... button is activated.
Click the IstMlt... button.
The IST MLT dialog box appears. See
125).

IST MLT dialog box

Enter a peer IP address in that field.
Enter a VLAN ID in that field
Select the enable option button in the SessionEnable: area.
Click Apply.
The IST MLT dialog box closes and the changes are applied. The
IST MLT is now configured.
describes the fields for the IST MLT dialog box.
Action
Select VLAN > MLT from the Device Manager menu bar.
The MLT dialog box appears with the MultiLink Trunks tab selected.
Select the IST MLT you want to remove by clicking in any field.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Configuring SMLT 125
"IST MLT dialog box" (page
—End—