Stg Dialog Box - Status Tab; Table 17 Stg Status Tab Fields - Nortel 8300 User Manual

Step
1
2

STG dialog box - Status tab

Table 17 "STG Status tab fields" (page 97)
fields.
Table 17
STG Status tab fields
Field
BridgeAddress
NumPorts
ProtocolSpecification
TimeSinceTopologyChange
TopChanges
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
Action
Select VLAN > STG from the Device Manager menu bar.
The STG dialog box appears with the Globals tab selected. See
"STG dialog box - Globals tab" (page
Click the Status tab.
The Status tab appears. See
97).
Description
The MAC address used by this bridge when it must be
referred to in a unique fashion.
The number of ports controlled by this bridging entity.
Indicates the version of the STP in use. The IEEE
802.1d implementations return ieee8021d.
Indicates the time (in hundredths of a second) since the
last time a topology change was detected by the bridge
entity or STG.
A topology change trap is sent by a bridge when any of
its configured ports transitions from the Learning state
to the Forwarding state, or from the Forwarding state
to the Blocking state. The trap is not sent if a new root
trap is sent for the same transition. Implementation of
this trap is optional.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
Spanning tree groups 97
92).
"STG dialog box - Status tab" (page
—End—
describes the STG Status tab