Adding A Link Aggregation Group; Mlt Dialog Box - Multilink Trunks Tab - Nortel 8300 User Manual

110 Configuring static link aggregation
The Ethernet Routing Switch 8300 determines the port that a packet is
transmitted through, using one of the following methods:
•
•

Adding a link aggregation group

To add a link aggregation group:
Step
1
2
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
tabulating the trunks and their active assigned port members for each
link aggregation group
Ports defined as trunk members are written to the table in the order
they were activated. If a link goes down, the table is rewritten with one
less trunk member.
using a selected index, based on traffic type and hashing algorithm.
Action
From the Device Manager menu bar, select VLAN > MLT .
The MLT dialog box appears and displays active link aggregation
groups. See "MLT dialog box - MultiLink Trunks tab" (page

MLT dialog box - MultiLink Trunks tab

See Table 22 "MLT dialog box - MultiLink Trunks fields" (page
112) for field descriptions.
Click Insert.
The MLT, Insert MultiLink Trunks dialog box appears. See
Insert MultiLink Trunks dialog box" (page
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
110).
"MLT,
111).