Nonin 8600V Operator's Manual page 18

Patient Alarm Limits
Set the patient alarm condition switches located on the front of the 8600V to the attending veterinarian's
recommendations. These values may be changed at any time and will take effect immediately.
Patient Alarm
pulse rate high
pulse rate low
SpO High Limit
2
The button labeled with the
the SpO high alarm are given in Table III. An alarm condition exists if the SpO
2
SpO high limit level
2
•
Press the button to the left of the number to decrease value.
•
Press the button to the right of the number to increase value.
Figure V: Patient Alarm Display
SpO high
2
SpO low
2
60, 75, 100, 125, 150, 175, 200, 225, 250, 275,
Table III: Patient Alarm Values
next to the SpO
2
Alarm Values
85, 90, 92, 94, 95, 96, 97, 98, 99, OFF
55, 60, 65, 70, 75, 80, 85, 86,
87, 88, 89, 90, 91, 92, 95, OFF
300, 325, 350, 375, 425, OFF
20, 25, 30, 40, 50, 60, 70, 80, 100,
120, 140, 160, 180, 200, 250, OFF
% display sets the high SpO
15
alarm limit. The available values for
2
level is at or above the chosen
2