Dismantling And Rinsing The Professional Fine Foam Frother - Jura IMPRESSA C50 Instructions For Use Manual

5 Maintenance
Dismantling and rinsing
the professional fine
foam frother
32
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in JURA Cappuccino
Cleaner and then rinse them thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector Sys-
tem © .
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk. Your IMPRESSA will not prompt you
to dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the professional fine foam frother from the
Connector System
T Dismantle the professional fine foam frother into its individ-
ual parts.
T Rinse all the parts of the professional fine foam frother thor-
oughly under running water. If there are severely dried-on
milk residues, firstly immerse the individual parts in JURA
Cappuccino Cleaner and then rinse them thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the professional fine foam frother to the Con-
nector System
© by twisting slightly.
© .