Dismantling And Rinsing The Professional Fine Foam Frother - Jura J8 Instructions For Use Manual

Dismantling and rinsing the
professional fine foam
frother
2
Touch 'Next'.
T
'Cleaning agent for milk system'
Remove the milk pipe from the milk container or milk cooler.
T
Pour one dosing unit of milk system cleaner into the container
T
for milk system cleaning.
Place the container under the coffee spout and the professional
T
fine foam frother.
Connect the milk pipe to the container.
T
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
Touch 'Start'.
T
The professional fine foam frother and the milk pipe are
cleaned.
The operation stops automatically.
If insufficient foam is produced when the milk is frothed or milk
sprays out of the professional fine foam frother, the frother may be
need to be cleaned . If this happens, dismantle and rinse the
professional fine foam frother.
Remove the milk pipe and rinse it thoroughly under running
T
water.
Remove the professional fine foam frother.
T
1
Dismantle the professional fine foam frother into its individual
T
parts.
Rinse all the parts under running water. If there are severely
T
dried-on milk residues, firstly immerse the individual parts in a
solution of 8.5 oz (250 ml) water and one dosing unit of JURA
milk system cleaner. Then rinse the individual parts thoroughly.
7 Maintenance
/ 'Connect the milk tube'
25