Two speciality coffees at
the touch of a button
Cappuccino
When you prepare two drinks at once, the amount of water selected
for the single product is used for each cup.
The preparation of two espressi and two coffees follows this same
model.
Example: Proceed as follows to prepare two espressi.
Precondition:
ESPRESSO
T Place two espresso cups under the coffee spout.
k T Press the Rotary Switch twice (within 2 seconds), to start
preparation of two espressi.
2 CUPS
Preparation starts. The preset amount of water flows into
the cups.
Preparation stops automatically.
the display (example).
For a cappuccino you must first froth the milk using the fine foam
frother. You then prepare an espresso straight into the milk foam.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Precondition:
ESPRESSO
nected to the fine foam frother.
T Place a cup under the fine foam frother.
E If you are using the professional fine foam frother, turn the
selector switch to the Milk Foam position é.
n T Touch the Steam symbol.
/
HEATING
As soon as the machine has heated up,
appears, the light segment on the switch lights up.
h T Turn the switch to the m position.
appears and the milk foam is prepared.
STEAM
j T When the cup is about two thirds full of milk foam, turn the
switch to the o position.
/
STEAM
READY
is displayed (example).
ESPRESSO
is displayed (example). Milk is con-
STEAM
2 Preparation
appears on
/
STEAM
READY
17