Dismantling And Rinsing The Fine Foam Frother - Jura IMPRESSA C50 Instructions For Use Manual

Dismantling and rinsing
the fine foam frother
Precondition:
ESPRESSO
T Remove the milk pipe from the milk container or carton.
T Pour 250 ml of fresh water into a receptacle and add one
capful of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Place a receptacle under the fine foam frother.
n T Touch the Steam symbol.
/
HEATING
As soon as the machine has heated up,
appears, the light segment on the switch lights up.
h T Turn the switch to the m position.
appears and the fine foam frother and the milk
STEAM
pipe are cleaned.
j T As soon as the receptacle containing the cleaning solution is
empty, turn the switch to the o position.
/
STEAM READY
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the fine foam
frother once more.
h T Turn the switch to the m position.
, the fine foam frother and the milk pipe are rinsed
STEAM
with fresh water.
j T As soon as the receptacle containing the fresh water is
empty, turn the switch to the o position.
/
STEAM READY
The cleaning of the fine foam frother is now complete.
To make sure the fine foam frother works properly, and in the inter-
ests of hygiene, it must be dismantled and rinsed daily if you have
been preparing milk. Your IMPRESSA will not prompt you to disman-
tle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
System © by twisting slightly.
is displayed (example).
STEAM
5 Maintenance
/
STEAM READY
31