Dismantling And Rinsing The Professional Fine Foam Frother - Jura S8 Quick Reference Manual

S8 – Quick Reference Guide
Dismantling and rinsing
the professional fine
foam frother
2
4
All manuals and user guides at all-guides.com
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Remove the professional fine foam frother.
1
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250 ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation of the professional fine
foam frother.
T Re-fit the fine foam frother on the milk system.