Dismantling And Rinsing The Professional Fine Foam Frother - Jura E80 Instructions For Use Manual

Dismantling and rinsing
the professional fine
foam frother
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Remove the professional fine foam frother.
T Dismantle the professional fine foam frother into its
individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250 ml) cold water and 1 capful of
JURA milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the professional
fine foam frother.
T Re-fit the professional fine foam frother on the milk system.
5 Maintenance
31