Cleaning The Milk System; Dismantling And Rinsing The Professional Fine Foam Frother - Jura J8 Instructions For Use Manual

7 Maintenance

Cleaning the milk system

To ensure that the milk system always works properly, you must clean it daily when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
Use only original JURA maintenance products.
T
E JURA milk system cleaner is available from specialised dealers.
E Use the container supplied for milk system cleaning.
Precondition: The start screen is displayed.
Touch 'Clean the milk system'.
T
Touch 'Next'.
T
'Cleaning agent for milk system'
Remove the milk pipe from the milk container or milk cooler.
T
Pour one dosing unit of milk system cleaner into the container for milk system cleaning.
T
Place the container under the coffee spout and the fine foam frother.
T
Connect the milk pipe to the container.
T
E To connect the milk pipe to the container correctly, the pipe must be fitted with a connector.
Touch 'Start'.
T
The fine foam frother and the milk pipe are cleaned.
The operation stops automatically.

Dismantling and rinsing the professional fine foam frother

If insufficient foam is produced when the milk is frothed or milk sprays out of the professional fine foam frother, the frother may be dirty.
If this happens, dismantle and rinse the professional fine foam frother.
Remove the milk pipe and rinse it thoroughly under running water.
T
Remove the professional fine foam frother.
T
1
2
16
Tap, click or scan to watch
the video tutorial on YouTube
'Clean the milk system'
/ 'Connect the milk tube'
is displayed in the Cockpit.