Mercedes-Benz EQB 2022 Operator's Manual page 189

186 Driving and parking
* NOTE Damage to the vehicle socket or the
charging cable connector due to incorrect
handling
Do not use excessive force (maximum 300 N)
to insert the charging cable connector into the
vehicle socket to the stop. You may otherwise
damage the vehicle socket, the charging cable
connector or their contacts.
If you feel there is increased resistance,
#
pull the charging cable connector out of
the socket and reinsert it.
Requirements
The transmission is in position j.
R
The vehicle is unlocked or the distance
R
between the key and the vehicle does not
exceed 1 m.
The vehicle has not been started.
R
The charging cable is not taut.
R
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
Combo 1 vehicle socket Combo 2 vehicle socket
Press the centre rear section of socket flap
#
1 and swing the socket flap forwards and
open.
The % indicator lamp 2
play 3 light up white.
and status dis-