Mercedes-Benz EQB 2022 Operator's Manual page 188

Status of the Display
charging
process 2
# Lights up
orange
# Lights up
green
# Flashes red
(for approx.
90 s)
Starting the alternating current charging process
(mode 2/3)
& DANGER Risk of death when charging at a
damaged socket
The charging process uses high voltage.
If the charging cable, the vehicle socket or the
Meaning
mains socket are damaged, you could receive
an electric shock.
Only use an undamaged charging cable.
#
Interruption in
Avoid mechanical damage such as crush-
#
charging
ing, abrading or driving over the cable.
Charging
Have a damaged vehicle socket replaced
#
process com-
at a qualified specialist workshop as
pleted
soon as possible.
Never connect the charging cable to a
Vehicle mal-
#
damaged vehicle socket.
function;
charging is
not possible
* NOTE Damage due to overheating of
charging cable and charge port
During the charging process, the charging
cable and charge port can heat up within the
permissible limits.
The permissible limit values are influenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
Driving and parking 185
the instructions for handling the charging
R
cable and the control element on the
charging cable have been observed
If the charging cable or charge port
#
becomes too hot, have the power supply
system checked.
* NOTE Damaged or dirty vehicle socket
when the socket flap is open
Always keep the socket cover and the
#
socket flap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.