Mercedes-Benz EQB 2022 Operator's Manual page 227

224 Driving and parking
End the support by actively steering in
#
non-critical situations.
Drive at an appropriate speed if there
#
are pedestrians close to the path of your
vehicle.
System limits
Full system performance is not available for a
short time after switching on the vehicle or after
driving off. Depending on the environmental con-
ditions, it may take a few minutes before full sys-
tem performance is available.
The system may be impaired or may not function,
particularly in the following situations:
In snow, rain, fog, heavy spray, if there is glare,
R
in direct sunlight or in greatly varying light
conditions.
If the sensors are dirty, misted up, damaged or
R
covered.
If the sensors are impaired due to interference
R
from other radar sources, e.g. strong radar
reflections in multi-storey car parks.
If a loss of tyre pressure or a defective tyre
R
has been detected and displayed.
In complex traffic situations where objects
R
cannot always be clearly identified.
If pedestrians or vehicles move quickly into
R
the sensor detection range.
If pedestrians are hidden by other objects.
R
If the typical outline of a pedestrian cannot be
R
distinguished from the background.
If a pedestrian is not detected as such, e.g.
R
due to special clothing or other objects.
If the driver's seat belt is not fastened.
R
On bends with a tight radius.
R
% The Active Brake Assist sensors adjust auto-
matically while a certain distance is being
driven after the vehicle has been delivered.
Active Brake Assist is unavailable or only par-
tially available during the teach-in process.
▌Activating/deactivating Active Brake Assist
Requirements
The vehicle is switched on.
R
Multimedia system:
© Settings Assistance
4 5 5
Active Brake Assist
5
Select the desired setting.
#
Deactivating Active Brake Assist
%
It is recommended that you always leave
Active Brake Assist activated.
Select Off.
#
The distance warning function, the autono-
mous braking function and Evasive Steering
Assist are deactivated.
The system is switched on again the next time
the vehicle is started.
%
If Active Brake Assist is deactivated, the æ
symbol appears in the status bar of the Instru-
ment Display.