Mercedes-Benz EQB 2022 Operator's Manual page 354

* NOTE Damage to the vehicle due to using
an unsuitable jack
You can damage the vehicle and, in particular,
the high-voltage battery if you use a jack that
is not specifically designed for the jack sup-
port points of the vehicle.
Only use jacks that are specifically
#
designed for the jack support points, or
use an appropriate adapter.
* NOTE Risk of damage to the vehicle due
to incorrect positioning of the jack
If you do not position the jack at the designa-
ted jack support points, you could damage
your vehicle and, in particular, the high-voltage
battery.
Only position the jack at the designated
#
jack support points.
Take the ratchet out of the tyre-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
2
Position support of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet 3 until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on a
#
dirty surface.
Unscrew the uppermost wheel bolt com-
#
pletely.
4
on jack sup-
2
1 and
page 351).
/
Wheels and tyres 351
page 349).
/