Mercedes-Benz EQB 2022 Operator's Manual page 174

Selecting the drive program
Press DYNAMIC SELECT switch
#
or backwards.
The drive program selected appears in the
multifunction display.
Configuring DYNAMIC SELECT (multimedia sys-
tem)
Multimedia system:
©
4 5
DYNAMIC SELECT
5
Setting drive program I
Individual
Select
#
Select and set a category.
#
Switching the reset display on or off
Activate or deactivate
#
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
1 prompt appears asking if the function should
forwards
remain deactivated.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
Settings Vehicle
5
configuration.
Ask when starting.
Driving and parking 171
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
Function off: if the Î drive program was the
last one active, and all requirements for the drive
program are fulfilled, this will be automatically
selected the next time the vehicle is started. If
another program was active, then the A drive
program is set automatically.
%
This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.