Mercedes-Benz EQB 2022 Operator's Manual page 195

192 Driving and parking
Press charging interruption button 2.
#
The charging process is ended. The % indi-
cator lamp 1 lights up white. The vehicle
socket is unlocked.
Remove the charging cable connector from
#
the vehicle socket.
%
If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a qualified specialist work-
shop.
Close the socket cover and the socket flap.
#
%
After the charging cable connector has been
disconnected, the left % indicator lamp
on the vehicle socket remains lit for some
time before switching off.
Function of the charge level display in the Instru-
ment Display
1 Current charge level
2 Time at which completely charged
1
3 Predicted charge level at pre-selected depar-
ture time
4
Current charging capacity
When the vehicle is connected to the mains sup-
ply and is switched off, the Instrument Display
shows the charge level display for approximately
two minutes.
The value of current charging capacity
fer from the display on the charging station. At a
charging capacity of 10 kW or higher, the value in
the charge level display is rounded off and shown
without a decimal place.
%
The value in
ting of the charging process. It displays the
charging prediction, e.g. the time at which the
selected charge level will be reached or the
charge level at the pre-selected departure
time.
Configuring the charging settings
Multimedia system:
© EQ
4 5
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
always starts immediately, irrespective of the next
departure time.
Departure
Select
#
4 can dif-
3 varies depending on the set-
Charging options
5
time.