Sockets - Mercedes-Benz EQB 2022 Operator's Manual

134 Seats and stowing
Observe the signposted headroom clear-
#
ance.
If the vehicle height is greater than the
#
permitted headroom clearance, do not
enter.
Observe the changed vehicle height with
#
add-on roof equipment.
* NOTE Damage to the panorama sliding
sunroof due to non-approved roof luggage
racks
The panorama sliding sunroof may be dam-
aged by the roof luggage rack if you attempt to
open it when using a roof luggage rack not
tested and approved for Mercedes-Benz.
When a roof luggage rack is fitted, open
#
the panorama sliding sunroof only if this
has been tested and approved for
Mercedes-Benz.
The panorama sliding sunroof may be raised
to allow ventilation of the vehicle interior.
Notes on driving with a roof load
Evenly distribute the roof load, and place
R
heavy objects at the bottom. Also comply with
the notes on loading the vehicle
( page 119).
/
Drive attentively, and avoid suddenly pulling
R
away, braking and steering as well as rapid
cornering.
When transporting roof loads and when the
R
vehicle is fully loaded or fully occupied, select
drive programs ; and A. These are
designed to focus on stability (
Secure the roof luggage rack to the roof rail-
#
ing.
Observe the manufacturer's installation
#
instructions.

Sockets

Using the 12 V socket
Requirements
Only devices up to a maximum of 180 W
R
(15 A) are permissible.
Depending on the vehicle equipment, the vehicle
has the following 12 V sockets:
In the stowage compartment in the front
R
centre console
In the stowage compartment under the front
R
armrest
In the load compartment
R
page 169).
/
Example: 12 V socket in the stowage compartment
in the front centre console
Fold up socket cap 1.
#
Insert the plug of the device.
#