Mercedes-Benz EQB 2022 Operator's Manual page 193

190 Driving and parking
The charging cable is not taut.
R
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
Combo 1 vehicle socket
Combo 2 vehicle socket
Press the centre rear section of socket flap
#
1 and swing the socket flap forwards and
open.
The % indicator lamp 2
play 3 light up white.
%
When the vehicle is started (the õ display
is lit in the Instrument Display), socket flap
cannot be opened.
Press catch
#
socket cover 5.
%
The CCS charging cable connector requires
connections
essary to open both parts of socket cover 5.
Insert the CCS charging cable connector into
#
the vehicle socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp
play 3
voltage battery is charged, green.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with the
# indicator lamp
and status dis-
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the Instrument Display
7 to the left and fold open
6 and 8. Therefore, it is nec-
4 and status dis-
flash orange and, as soon as the high-
4 ( page 144).
/
1