Notes On Assembling The Number Plate On The Front Licence Plate Holder - Mercedes-Benz GLC 200 4MATIC Owner's Manual

Vehicles with hybrid systems generate signifi-
cantly less noise when stationary and when being
driven than vehicles with combustion engines.
When driving in electric mode, the vehicle may
not be heard by other road users due to the signif-
icantly reduced noise generated.
It is for this reason that the vehicle is equipped
with a sound generator, which serves as an acous-
tic vehicle alerting system (AVAS).
Vehicles with a 48 V on-board electrical system
& DANGER Risk of fatal injury by touching
damaged high-voltage components
Vehicles with a 48 V on-board electrical sys-
tem contain individual high-voltage compo-
nents. These high-voltage components are
under high voltage.
If you modify component parts of these high-
voltage components or touch damaged com-
ponent parts, you may be electrocuted.
High voltage components may be damaged in
an accident, although the damage may not be
visible.
Never perform modifications to compo-
#
nent parts of high-voltage components.
Never touch damaged component parts
#
of high-voltage components.
Never touch component parts of high-
#
voltage components after an accident.
Vehicles with a 48 V on-board electrical system
contain high voltage components. These compo-
nents are marked with a high voltage label:
All work on high voltage components must be car-
ried out at a qualified specialist workshop.
General notes
Notes on assembling the number plate on the
front licence plate holder
* NOTE Malfunctions and system failures
due to incorrect assembly of the licence
plate on the front licence plate holder
If the licence plate is incorrectly assembled on
the front licence plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when assembling
the licence plate on the front licence plate
holder:
Assemble the licence plate directly on
#
the licence plate holder without advertis-
ing media or other holders.
Assemble the licence plate so that it
#
does not protrude above or to the side of
the licence plate adapter.
25