Table of Contents
Advertisement
96
Seats and stowage
Installation position
Insert the folding table into guide rails
#
that arrows
3
on the folding table point to
both markings
4
The guides and sliding rail on the underside of
the folding table fit into the guide rail.
Pull lever
5
on the front or rear side of the
#
folding table upwards and push the folding
table backwards.
Press both covers
1
slightly together and
engage in the openings of the guide rails.
Moving the folding table
Keep lever
5
pulled and move the folding
#
table into the desired position.
Release lever 5.
#
Move the folding table until it automatically
#
engages in the next possible position.
After repositioning the table, ensure that the
#
folding table is properly secured again.
2
on guide rail 2.
Removing the folding table
Fold in the table panels and retract the table.
#
Push the rear seats back fully or, if necessary,
#
remove.
Push the folding table back far enough so that
#
covers
1
removed.
Lift off both covers
#
using a suitable tool, e.g. a screwdriver.
Press both covers
#
remove from guide rail 2.
The openings in the rail for the middle slide
on the underside of the folding table will be
open.
Push the folding table forwards into the
#
installation position.
so
Arrows
3
markings
4
Lift the folding table out of guide rail 2.
#
Press both covers
#
engage in the openings of guide rails 2.
Using the folding table
Extending the folding table
Press the button
#
release it.
The folding table moves upwards and engages
automatically.
Retracting the folding table
Press the button
#
simultaneously press the centre section of
the folding table downwards.
Release the button
#
is in its retracted position.
The centre section of the folding table
engages automatically.
of the openings in the rail can be
1
from the guide rail
1
slightly together and
on the folding table point to both
on guide rail 2.
1
slightly together and
1
all the way down and
1
all the way down and
1
when the folding table
Advertisement
Table of Contents
