Mercedes-Benz EQV 2020 Owner's Manual page 73

70 Opening and closing
When the ATA system is primed, indicator lamp
1 flashes in the overhead control panel.
ATA is automatically deactivated in the following
situations:
After unlocking the vehicle with the key.
R
When the key is inserted into the ignition
R
lock.
%
The alarm is not deactivated, even if you
immediately close the open door that has
triggered it, for example.
Priming/deactivating ATA (Anti-theft Alarm
system)
Priming
Close all the doors.
#
Lock the vehicle with the key.
#
Indicator lamp 1
panel flashes.
Deactivating
Unlock the vehicle with the key.
#
or
Insert the key into the ignition lock.
#
Indicator lamp 1
panel goes out.
Stopping the alarm
Press the % or & button on the key.
#
or
Insert the key into the ignition lock.
#
The alarm stops.
Function of tow-away protection
Function of tow-away protection
A visual and audible alarm is triggered if the incli‐
nation of the vehicle changes when tow-away
protection is primed. This can be the case if the
vehicle is raised on one side, for example.
in the overhead control
in the overhead control
Priming/deactivating tow-away protection
Requirements:
The doors are closed.
R
Priming
Lock the vehicle with the key.
#
Tow-away protection is automatically primed
after about 50 seconds.
Deactivating
Open the vehicle with the key.
#
or
Insert the key into the ignition lock.
#
Tow-away protection is deactivated.
Deactivating
Remove the key from the ignition lock.
#
Press button 1.
#
When the button is released, indicator lamp
2 in the button lights up for approximately
three seconds.
Lock the vehicle with the key.
#
Tow-away protection is deactivated.
Tow-away protection remains deactivated until
you lock the vehicle again.
Deactivate tow-away protection when locking
your vehicle in the following situations:
when loading and/or transporting the vehicle
R
on a ferry or car transporter, for example
when parking the vehicle on a movable sur‐
R
face, such as a split-level garage
This will prevent false alarms.