Table of Contents
Advertisement
Replacing interior light bulbs
Replacing light sources in the interior
Requirements
The interior lighting has been switched off.
R
Rear and load compartment lamp: you
R
require a T10 6W xenon light source.
Interior and surround lighting: you require
R
a W 5 W light source.
Signal and ambient lamp in the tailgate:
R
you require a W 5 W light source.
Rear and load compartment lamps
Push in the catch spring of lens
#
suitable object, e.g. a screwdriver, and then
prise off the lens with the lamp housing.
Push the lugs of socket
#
Remove light source
#
ing.
Insert the new light source.
#
Position the lens on the lamp housing and
#
engage it.
Align the lens with the lamp housing and
#
engage it.
Additional interior and surround lighting
Depending on the equipment, replacing the light
sources as described here applies to the follow‐
ing lamps:
The sun visor mirror lamp
R
The ambient lamp at the bottom of the front
R
door
The ambient lamp on the inside of the tailgate
R
1
with a
2
inwards.
3
from the lamp hous‐
Push in the catch spring of lamp housing
#
with a suitable object, e.g. a screwdriver, and
prise off lamp housing 1.
Turn socket
2
anti-clockwise and pull it out
#
of lamp housing 1.
Pull bulb
3
out of socket 2.
#
Push new bulb
3
#
Screw socket
2
into the lamp housing
#
turning it clockwise.
Place lamp housing
#
and engage it.
Signal and ambient lamp in the tailgate
Push in the catch spring of the lamp housing
#
on the side of transparent lens
able object, e.g. a screwdriver, and prise off
the lamp housing.
Turn socket
3
anti-clockwise and pull it out
#
of the lamp housing.
Pull the bulb out of socket 3.
#
Push the new bulb into socket 3.
#
Light and vision 111
into socket 2.
1
1
in position on the left
2
with a suit‐
1
by
Advertisement
Table of Contents
