Table of Contents
Advertisement
108 Light and vision
Have the following light bulbs changed at a quali‐
fied specialist workshop only:
Bulbs in the licence plate lighting
R
Bulbs and lamps are major elements in vehicle
safety. Therefore, ensure that they are always
working. Have the headlamp setting checked reg‐
ularly.
If the new light bulb also does not light up, con‐
sult a qualified specialist workshop.
Replacing front light bulbs (vehicles with hal‐
ogen headlamps)
Overview of front light source types
1
Additional turn signal lamp on the outside
mirror: LED
2
Turn signal light: PY 21 W
3
Low beam: H7 55 W
4
High beam/standing/parking lights/daytime
running lights: H15 55 W/15 W
Replacing light bulbs in the headlamp
Requirements:
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
Low beam: you require a H7 55 W light bulb.
R
Turn signal light: you require a PY 21 W light
R
bulb.
High beam / standing/parking lights /
R
daytime running lights: you require a
H15 55 W/15 W light bulb.
Fitting/removing the cover in the front wheel
arch
To remove: grip the centre of cover 1, slide
#
it upwards and pull it out.
The cover will hang downwards on the strap.
To install: insert cover
#
slide it downwards until it engages.
Low beam
Remove the cover in the front wheel arch.
#
Turn housing cover
#
remove it.
Turn socket
2
for low beam to the left and
#
pull it out.
Pull the bulb out of socket 2.
#
Insert the new bulb into socket 2.
#
Insert socket
2
and rotate it to the right to
#
tighten it.
Press on housing cover
#
the right to tighten it.
1
at the top and
1
anti-clockwise and
1
and rotate it to
Advertisement
Table of Contents
