Mercedes-Benz EQV 2020 Owner's Manual page 79

76 Seats and stowage
During the adjustment process of the
#
memory function, make sure that no
one has any body parts in the sweep of
the seat.
If somebody becomes trapped, immedi‐
#
ately release the memory function posi‐
tion button.
The adjustment process is stopped.
& WARNING Risk of entrapment if the
memory function is activated by children
Children could become trapped if they acti‐
vate the memory function, particularly when
unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the key with you and lock the vehicle.
The memory function can be used when the igni‐
tion is switched off.
* NOTE Damage to the seat when moving
into a stored position
If the seat is moved out of the fully reclined
position into a stored seat position, it can col‐
lide with other vehicle parts.
This can damage the seat.
Before moving the seat into a stored
#
position, move the seat backrest into an
upright position.
Storing seat settings
Seat settings for up to three people can be stored
and called up using the memory function.
The following settings are stored as a single
memory preset:
the position of the seat, seat backrest and
R
head restraint
additionally for the driver's side, the position
R
of both exterior mirrors
Adjust the seat to the desired position.
#
Adjust the exterior mirror to the desired posi‐
#
tion.
Briefly press memory button V and then
#
press preset position button 4, T or
U within three seconds.
An acoustic signal sounds. The settings are
stored.
To call up: press and hold preset position
#
button 4, T or U until the seat and
the exterior mirrors are in the stored position.
Rotating the front seats
& WARNING Risk of injury or fatal injuries
due to the driver's seat and front
passenger seat not being engaged
In this situation, the restraint systems cannot
perform their intended protective function.
Engage the driver's seat and front
#
passenger seat in the direction of travel
before you start the drive system.
* NOTE Damage to the seats due to colli‐
sion with adjacent car parts
The seats can collide with adjacent car parts
when they are rotated.
This can damage the seats.
When rotating the seats, make sure
#
there is sufficient clearance.