Mercedes-Benz EQV 2020 Owner's Manual page 47

Table of Contents

Advertisement

44
Occupant safety
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
®When fitting an ISOFIX child restraint sys‐
tem, also observe the following:
O When using a Group 0/0+ baby car seat
and a Group 1 rearward-facing child
restraint system on a rear seat: adjust the
front seat so that the seat does not touch
the child restraint system.
O Move the rear seat backrest to an upright
position before you fit the child seat. Do not
adjust the seat backrest when an ISOFIX
child restraint system is fitted.
O For certain child restraint systems in weight
group 2 or 3, there may be restrictions on
the maximum size setting, e.g. due to possi‐
ble contact with the roof.
O Do not put the child restraint system under
strain between the roof and the sitting sur‐
face and/or fit it facing the wrong direction.
O Do not put the child restraint system under
strain by the head restraint. Adjust the head
restraints as appropriate.
1
ISOFIX mounting brackets
Before every journey, make sure that the ISOFIX
child restraint system is engaged correctly in
both mounting brackets in the vehicle.
* NOTE Damage to the seat belt for the
centre seat during installation of the child
restraint system
Make sure that the seat belt is not trap‐
#
ped.
Attach the ISOFIX child restraint system to
#
both mounting brackets
Securing Top Tether
* NOTE Damage to the single rear seat
when you use the EASY ENTRY easy entry
and exit feature and a child restraint sys‐
tem secured using Top Tether
If a child restraint system is secured using
Top Tether and the EASY ENTRY easy entry
and exit feature is used, the single rear seat
may be damaged.
Before you use the EASY ENTRY easy
#
entry and exit feature, unhook the Top
Tether hook from the anchorage.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX and
the vehicle.
Example
Top Tether anchorage
2
the rear seat on the cross strut between the
seats or bench seat legs.
Fit the ISOFIX child restraint system with Top
#
Tether. Comply with the child restraint system
manufacturer's installation instructions.
1
in the vehicle.
is on the lower part of

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqv

Table of Contents