Mercedes-Benz EQV 2020 Owner's Manual page 61

Table of Contents

Advertisement

58
Opening and closing
You can open and close the sliding door with
these controls:
Sliding door buttons on the centre console
R
Sliding door button on the door sill (B-pillar)
R
Door handle (inside or outside)
R
Key
R
The sliding door is equipped with automatic
obstacle detection with reversing function. If a
solid object blocks or restricts the sliding door
during the automatic closing process, the sliding
door opens again automatically. If the sliding
door is obstructed during the opening procedure,
it moves back a few centimetres in the opposite
direction and stops.
The automatic object detection with reversing
function is only an aid. It is not a substitute for
your attentiveness when closing the electrical
sliding door.
If an obstacle is detected, the display shows the
Left-hand electric sliding door Obstruction detec-
ted
message, for example, and five warning tones
sound.
%
In unfavourable operating conditions, e.g.
frost, ice or heavy soiling, press and hold the
appropriate sliding door button. The electric
sliding door moves with increased force.
Observe that, in such circumstances, the
obstacle detection is less sensitive. To stop
the movement, release the sliding door but‐
ton.
Opening and closing the electrical sliding
door from the inside
& WARNING Risk of becoming trapped due
to sliding door opening towards the rear
When you open the sliding door, the sliding
door could hit other people as it moves
towards the rear of the vehicle.
Only open the sliding door when traffic
#
conditions permit.
Opening
1
Sliding door button for the sliding door on the
left-hand side
2
Sliding door button for the sliding door on the
right-hand side
3
Rocker switch
4
Locking knob
5
Sliding door button in the door sill
You can only open a sliding door with sliding door
button
5
in the door sill or with rocker switch
3
on the door handle if the child-proof lock has
not been activated.
The sliding door is equipped with an active
retainer, which engages the door at the end stop
when opened.
Briefly press appropriate sliding door button
#
1
or
2
in the centre console.
or
Press sliding door button
#
or
Briefly pull back rocker switch 3.
#
If the door is locked, locking knob
up. The sliding door unlocks, automatic oper‐
ation is started and the sliding door opens.
5
in the door sill.
4
pops

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqv

Table of Contents