Mercedes-Benz EQV 2020 Owner's Manual page 140

to the improved charging performance and better
charging efficiency offered.
System limits
The charging time of the high-voltage battery may
be increased by the following:
high or low outside temperatures
R
the vehicle being non-operational for long
R
periods without charge
the maximum available charging current of
R
the wallbox or power supply equipment
the settings for the charging process in the
R
on-board computer (
Function of the charging prediction
When the vehicle is connected to the mains sup‐
ply and the ignition is switched off, the multifunc‐
tion display shows the charge level display with
an estimated charging time. The display automat‐
ically switches off after approximately two
minutes.
1
Level of charge
2
Estimated time for set charge level
3
Set charge level
4
Display if a departure time or week profile is
active/inactive (
/
5
Estimated charge level at set departure time
6
Display if pre-entry climate control has been
set ( page 123)
/
7
Current charging power output and set
charging current limit (
Setting the charging process
Multimedia system:
© EQ
4 5 5
Setting the charging process
Select Departure time.
#
page 137)
/
3
page 137)
page 137)
/
Charging options
The following charging times can be selected:
Charge immediately
R
Once
R
Select a setting.
#
Setting a single departure time
Select Departure time.
#
Select Edit single time.
#
Set a departure time.
#
Setting the maximum charging current
Select Maximum charge
#
Select Maximum, 8 amps
#
When the high-voltage battery is charged, the
charging current is limited to the selected
amperage.
%
The actual value of the maximum charging
current depends on the fixed value of the
charging cable provided.
Setting the maximum charge level
Select Maximum charge
#
Set the desired percentage.
#
The high-voltage battery is charged up to the
set percentage as a maximum.
%
The percentage can be set in increments of
10%.
A maximum charge level of 80% is recom‐
mended. Higher maximum charge levels can
diminish the longevity of the high-voltage bat‐
tery ( page 135).
/
%
As soon as the full charge level is reached, a
notification is shown in the media display
that the charging process is completed and
the journey may be continued.
Functions of the indicator lamps on the vehi‐
cle socket
The socket flap is centrally locked and unlocked
together with the vehicle.
Driving and parking 137
(no departure time)
current.
or 6 amps.
state.