Table of Contents
Advertisement
84
Seats and stowage
Make sure that all sliders for fore-and-aft
#
adjustment are engaged on both sides.
It should not be possible to move the rear
bench seat.
Fold the rear bench seat forwards
#
(
page 83).
/
Pull release handle
#
Hold the rear bench seat by grab handles
#
and lift it out of seat anchorages 4.
%
If the second rear seat row is to be removed
or tilted, the seat or bench seat in the first
rear seat row must first be tilted forward to
avoid damage to the seats.
Installing the rear bench seat
Hold the rear bench seat by grab handles
#
and guide it into front seat anchorages
an angle from above.
Tilt the rear bench seat back and allow it to
#
engage.
Release handles
2
the vehicle floor.
Fold the rear bench seat back into the seat
#
position.
The rear seat legs of the rear bench seat are cor‐
rectly engaged when the seat legs engage audibly
and the indicator tabs on the seat legs are no lon‐
ger visible and have fully retracted into the seat
legs.
Slide the rear bench seat into the basic set‐
#
ting (
page 82).
/
Using the EASY-ENTRY easy entry and exit
feature (rear seat)
& WARNING Risk of accident‑ and injury if
the seat is not engaged
If a seat is not engaged, it may be thrown
about while the vehicle is moving.
Always make sure that all seats are
#
engaged as described.
In order to ensure that the seats can securely
engage, keep the seat guide rails and anchorages
in the vehicle floor free from dirt and foreign
objects.
& WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant.
3
upwards.
4
will fold down towards
When adjusting a seat, make sure that
#
no one has any body parts in the sweep
of the seat.
& WARNING Risk of becoming trapped if
the seat is not engaged
The seat does not engage when folded for‐
1
wards. The seat can fold backwards unex‐
pectedly, e.g. when accelerating, braking or in
the event of an abrupt change of direction or
an accident.
People in the seat's sweep can become trap‐
ped.
If a seat is folded forwards, always fold
#
it back before driving off.
1
Make sure that the seat is engaged.
at
#
If you fold the rear seat forwards, it is easier to
get into or out of the second rear seat row.
To fold the rear seat forwards: pull one of
#
the two EASY-ENTRY release handles
upwards and fold the rear seat forwards.
To fold the rear seat back: fold the rear seat
#
back using the grab handle
engages in the seat anchorages.
The indicator tab
is fully retracted into the seat anchorage.
Adjusting the seat backrest (rear seat)
Pull the release handle for seat backrest
#
upwards and hold it in position.
2
1
until it
3
is no longer visible and
1
Advertisement
Table of Contents
