Table of Contents
Advertisement
e.g. the brake system, may malfunction. Use only
genuine Mercedes-Benz GenuineParts or parts of
equal quality. Use only tyres, wheels and acces‐
sories that are approved for your vehicle model.
Mercedes-Benz tests original parts, conversion
parts and accessories that have been approved
for your vehicle model for reliability, safety and
suitability. Despite ongoing market research,
Mercedes-Benz is unable to assess other parts.
Mercedes-Benz accepts no responsibility for the
use of such parts in Mercedes-Benz vehicles,
even if they have been approved officially or inde‐
pendently by a testing centre.
Certain parts are only officially approved for
installation or modification if they comply with
legal requirements. All genuine Mercedes-Benz
GenuineParts meet the registration requirements.
The use of non-approved parts may invalidate the
vehicle's general operating permit.
This is the case in the following situations:
the vehicle type changes from that stated in
R
the general operating permit.
other road users could be endangered.
R
the noise level increases.
R
Always specify the vehicle identification number
(VIN) when ordering genuine Mercedes-Benz
parts (
page 312).
/
Information about attachments, add-on
equipment, installations and conversions
Notes on body/equipment mounting direc‐
tives
For safety reasons, have add-on equipment pro‐
duced and fitted in accordance with the valid
Mercedes-Benz body/equipment mounting direc‐
tives. These body/equipment mounting directives
ensure that the chassis and add-on equipment
form one unit and that the greatest possible level
of operational and driving safety is achieved.
Both vehicle manufacturers and body manufac‐
turers must always ensure that the products they
manufacture come into circulation only in a safe
state and do not pose any risks to people. Other‐
wise, there may be consequences under civil,
criminal or public law. All manufacturers are
responsible for the products that they have man‐
ufactured. Manufacturers of attachments, add-on
equipment, installations and conversions must
guarantee compliance with Directive
2001/95/EC on general product safety.
Mercedes-Benz recommends the following proce‐
dure for safety reasons:
Do not make any other changes to the vehi‐
R
cle.
Obtain approval from Mercedes-Benz in the
R
event of deviations from the approved body/
equipment mounting directives.
Acceptance tests performed by public test bodies
or official approvals do not rule out safety risks.
Comply with the information about Mercedes-
Benz genuine parts (
/
You will find the Mercedes-Benz body/equipment
mounting directives online at the https://bb-
portal.mercedes-benz.com/en/GLOBAL.
You will also find information about the PIN
assignment and changing the fuse there.
%
You can obtain further information at a quali‐
fied specialist workshop.
& WARNING Risk of accident and injury in
the event of improper conversions or
changes to the vehicle
Conversions or changes to the vehicle can
prevent systems or components from func‐
tioning properly and/or jeopardise the vehi‐
cle's operational safety.
Always have conversions or changes to
#
the vehicle carried out at a qualified
workshop.
Notes on the radiator
Even seemingly minor changes to the vehicle,
such as attaching a radiator grille in winter, are
not permitted. Do not cover the radiator. Do not
use any thermal mats, insect protection covers
etc.
Otherwise, the values of the vehicle's diagnostic
system will be distorted. In some countries, the
recording of engine diagnostics data is prescri‐
bed by law and must be verifiable and correct at
all times.
Operating Instructions
These Operating Instructions describe all models,
as well as standard and optional equipment of
your vehicle that was available at the time of
going to press. Country-specific differences are
possible. Note that your vehicle may not be fitted
with all functions described. This is also the case
for systems and functions relevant to safety.
General notes
page 16).
17
Advertisement
Table of Contents
