Mercedes-Benz EQV 2020 Owner's Manual page 46

Size class: Device:
D ISO/R2
C ISO/R3
Weight group 1 (9–18 kg and approx. 9 months to 4 years)
D ISO/R2
C ISO/R3
B ISO/F2
B1 ISO/F2X
A ISO/F3
X Not suitable for an ISOFIX child restraint system in this weight group and/or size class.
IL Suitable for ISOFIX child restraint systems according to the table in "Overview of the recommended child restraint systems", or if the vehicle
and the seat are listed on the child restraint system manufacturer's vehicle model list.
IUF Suitable for forward-facing ISOFIX child restraint systems of the "Universal" category in this weight group.
1 Only on the first rear seat row on a rear bench seat.
2 The seat must be installed in the direction of travel.
3 It is permissible to use a seat on the second rear seat row only if the maximum distance between the two rear seat rows is set. To do so, the
seat on the second rear seat row must be fitted in the rearmost position allowed and the seats on the first rear seat row in front must be fitted
in the foremost position allowed. If you use the centre seat on the second rear seat row, all the seats on the first rear seat row must be fitted in
the foremost position allowed.
4 If you are using a child restraint system in size class C (ISO/R3), make sure that the front seat backrest does not rest against the child
restraint system. If possible, move the front seat to the highest position and the seat backrest to the upright position.
Fitting an ISOFIX child restraint system on
the rear seat
& WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system is exceeded
The ISOFIX child seat securing systems may
be overloaded and the child may not be
restrained in the event of an accident, for
example.
If the child and the child restraint sys‐
#
tem together weigh more than the per‐
missible gross mass of 33 kg, use only
an ISOFIX child restraint system that
secures the child with the vehicle seat
belt.
Also secure the child restraint system
#
with the Top Tether belt, if available.
Rear seat / rear bench seat
2, 3
IL
2, 3, 4
IL
2, 3
IL
2, 3, 4
IL
IUF
IUF
IUF
Always comply with the information about the
mass of the child restraint system:
in the manufacturer's installation and operat‐
R
ing instructions for the child restraint system
used
on a label on the child restraint system, if
R
available
Check regularly that the permissible gross mass
of the child plus the child restraint system is not
exceeded.
When you install a child restraint system, observe
the following:
O Always observe the correct use and suitabil‐
ity of the seats for attaching a child restraint
system.
ISOFIX child seat attachment (
O Always observe the manufacturer's installa‐
tion and operating instructions for the child
restraint system used.
Occupant safety 43
page 42)
/